The Kluge Electric Auger Drill Adaptor by KECO is chuck mounted and is the most convenient way to get your hand ice auger working for you. Open the chuck, when you get home, and your cordless drill is ready for another job. Chuck mounting leaves open the possibility your drill will come out of the chuck at the worst possible time and your ice auger goes down the hole. This keco adapter has cross arms that rotate freely on the shaft to stop the drill at the ice surface. Three drive flats are used for the most secure chuck mounting.

This innovate product simply fits into any 1/2" electric drill. No special chuck is required. We do recommend the use of a drill that offers a low gear ratio since electric drills often go from 0 to 100% so fast, the drill could spin right out of your hand if the auger bit gets stuck. The auger attachment is simply the bottom end of a hand Lazer auger from Strikemaster. You will need to go to your local ice fishing dealer to buy the StrikeMaster hand auger separately and easily attached it to the adaptor.

Kluge Drill Attachment: $45.00

Sold Out

Features:

• Flexible Power System Match battery to application. Fatpack (2 included) for 36 volt power and maximum runtime.
• Litheon 36V batteries The most advanced Li-ion battery available today allows more battery charges and longer run times.
• Brute Tough Construction with Unibody Powertrain, Metal-Reinforced Collar and Durashield Housing. Constructed to wothstand real world conditions. Withstands repeated 1-story drops when the competition fails.
• Hammer on/off ring Easily engage and disengage
• Hammer Torque Mode Produces over 600 in.-lbs.
• Externally Accessible Brushes for brush replacement in as little as 2 minutes
• Ratcheting, Carbide Tooth Single Sleeve 1/2" Chuck for one-handed bit changes.
• 15-Position clutch
• BOSCH Designed Powertrain with Metal Gears
• Litheon Fast Charger Charges 36V batteries to 80% of capacity in 30 minutes

Specifications:

• No Load RPM:0-450 and 0-1,500
• No Loan BPM:18000
• Torque (in lbs.):600
• Weight (lbs.):6.1 lbs with Slimpack (without Assist Handle), 7.2 lbs with FatPack (without Assist Handle)
• Rating 36V

What's Included:

• (1) - Carrying Case
• (1) - Double-ended Bit
• (1) - Litheon Fast Charger
• (2) - Litheon 36V FatPack Batteries
• (1) - 360 Degree Auxiliary Handle

The Kwik Koupler provides an easy way to remove and store, transport, or change out your power auger's blade. Got a small vehicle that makes hauling around a power auger a challenge? Then the Kwik Koupler is for you. Simply unscrew the collar and the auger blade comes cleanly away from the power head. Learn more...

• Easy On, Easy Off
• Saves Space
• Prevents Shaft Damage during Transport
• No Tools Necessary
• Fits All Strikemaster™ and Jiffy™ Ice Augers