Free ice fishing tool

Augers For Ice Fishing

Enter the ice thickness, how many holes you plan to drill and your blade size. The calculator works out holes per battery from the maker's inches-per-charge figure, trims it for cold, and tells you how many batteries to bring. No electric auger yet? It also shows where a hand or gas auger makes more sense.

How many holes on a charge?

Ice, holes, blade and battery rating. Set the cold factor from your own count.

Loading the tool…

Ratings are the makers' best case; the cold factor is our planning default. This tool counts holes and does not check the ice. No sign-up, no ads; your numbers stay in this browser.

How it works

  1. Measure the ice. Inches or centimeters, from a hole you've already drilled or a recent local report.
  2. Plan the day. How many holes you expect to drill, and the blade: 6, 8 or 10 inches.
  3. Pick your auger or type its number. Choose a model from the table to fill in its rated inches per charge, or enter your own. Set the cold factor; it starts at 0.8, and you can change it.
  4. Read the plan. Holes per charge, batteries for the day and the auger types that fit. Print the day plan or download the CSV.

Where the numbers come from

The calculator turns a maker's rating into a plan for your ice. The rating, your ice thickness and one assumption of ours are all it uses.

  • Holes per charge = rated inches of ice per charge × cold factor ÷ ice thickness, rounded down to whole holes.
  • Batteries for the day = holes × ice thickness ÷ (rated inches × cold factor), rounded up.
  • Cold factor starts at 0.8. A planning default, not a measured constant. Two owner reports on one auger came out at 0.80 (cold battery, 15-17 F) and 0.82 (warm battery) of the maker's inches-per-charge rating. Set it from your own count.
  • Blade size. A bigger hole removes more ice, in proportion to the area: a 10″ hole removes 56% more than an 8″ hole at the same depth. Makers rate each blade size separately, which is why the same battery lists fewer inches with a 10″ blade.
Auger ratings in the calculator
AugerBladeRated per chargeMaker's wordingWeightSource
ION Alpha Pro 8"8″2,000 inup to 2,000 inches per charge14.3 lbION Ice Augers
ION Alpha Pro 10"10″1,200 inup to 1,200 inches per charge14.8 lbION Ice Augers
StrikeMaster Lithium 24v, 6" drill6″1,600 in100 holes in 16 inches of ice (100 x 16)not listedStrikeMaster
StrikeMaster Lithium 24v, 8" drill8″800 in50 holes in 16 inches of ice (50 x 16)14.3 lbStrikeMaster
Eskimo E40 Steel 8"8″1,300 inup to 1,300 inches per charge17.5 lbEskimo
Eskimo E40 Steel 10"10″800 inup to 800 inches per charge19.3 lbEskimo

StrikeMaster states its hole counts as "based on repeated tests with 16 inches of ice", so 50 holes with the 8″ drill is 800 inches. StrikeMaster's Maven lists no inches or holes per charge, so it has no rating here: pick "my own auger" and type your own count. Maker pages checked 2026-11-20.

  • ION Alpha Pro 8 inch, ION Ice Augers. Up to 2,000 inches of ice per charge, 14.3 lb, 40V 4Ah battery. Checked 2026-11-20.
  • ION Alpha Pro 10 inch, ION Ice Augers. Up to 1,200 inches of ice per charge, 14.8 lb, 40V 4Ah battery. Checked 2026-11-20.
  • Lithium 24v Auger, StrikeMaster (Rapala). 100 holes with the 6 inch drill or 50 holes with the 8 inch drill on one charge, 'based on repeated tests with 16 inches of ice'. 24V 4Ah battery. 14.3 lb with the 8 inch drill. Checked 2026-11-20.
  • 8" E40 Steel, Eskimo. Up to 1,300 inches per charge, 17.5 lb, 40V 4Ah battery. Checked 2026-11-20.
  • 10" E40 Steel, Eskimo. Up to 800 inches per charge, 19.3 lb, 40V 4Ah battery. Checked 2026-11-20.
  • 24V Strikemaster first impressions (owner thread), In-Depth Outdoors forum. Two owner reports on the 24V StrikeMaster 8 inch: 80 holes in 8 inches of ice at 15-17 F with a cold battery (640 inches), and 47 holes in about 14 inches with a warm battery (about 660 inches). The maker's rating works out to 800 inches. Single reports, not a test. Checked 2026-11-20.

How it compares

Hand, gas and electric augers
HandGasElectric (battery)
Power sourceYouSmall gas engineLithium battery, built in or a cordless drill
Starts in the coldAlwaysPull start, can be stubbornPush a button, but cold cuts the charge
Noise and fumesNoneLoud, exhaustQuiet, no fuel smell
Limit on holesYour armsFuel you carryInches per charge ÷ ice thickness
Rated inches per charge, examples
AugerBladeRated per chargeHoles in 20" of ice, on paper
Eskimo E408"Up to 1,300 inches65
Eskimo E4010"Up to 800 inches40
ION Alpha Pro10"Up to 1,200 inches60
ION Alpha Pro8"Up to 2,000 inches100
StrikeMaster 24V8"50 holes in 16" ice (800 inches)40

ION, StrikeMaster and Eskimo figures are from the makers' own pages, checked November 2026. StrikeMaster rates the 24V as 50 holes with the 8" drill "based on repeated tests with 16" of ice", which is 800 inches. Ratings are the maker's best case. The calculator's cold factor is there because real days come in under them: two owner reports on that 24V work out to 0.80 and 0.82 of its rating.

Checked November 2026: review lists from SI, FishUSA, Omnia and Dick's compare auger models without a calculator. One generic tool, Super Global Calculator, estimates holes per charge from battery voltage and amp-hours, blade size, ice thickness and air temperature, using a fixed energy-per-inch assumption instead of any maker's rating. Ours starts from the rating the maker prints, then lets you set the cold loss.

On paper

The day plan prints ice thickness, blade, holes planned, holes per charge and the number of batteries, with a line to write down how many holes you really got. Bring it home, fix the cold factor, and next trip's numbers are yours instead of the box's.

Back to the tool to print

Choosing and running an ice auger

Hand, gas or electric

A sharp hand auger is still the quietest, lightest way to open a hole. On first ice, 6 to 10 inches thick, it's quick and you won't miss a motor. By late winter, with two feet of ice, a dozen holes by hand is a workout and you'll fish fewer spots because of it.

Gas augers drill anything, all day, as long as there's fuel in the can. They're loud and heavy, and they smell. Plenty of guys still keep one for deep midwinter ice and big holes.

Electric took over the panfish crowd for a reason. Push a button and it spins, no choke, no pull cord, no fuel smell in the truck. The limit is the battery, and that's what the calculator is for.

Blade diameter and the fish you're after

Six inches is plenty for bluegill, crappie and perch, and it's the lightest to drill. Eight inches is the common all-around size for walleye, bass and most pike. Ten inches gives room to land a big pike or a lake trout without a fight at the hole.

A bigger hole costs more ice. A 10-inch hole removes about 56% more ice than an 8-inch one at the same depth (10² ÷ 8²). That's why Eskimo rates the same E40 at 1,300 inches with an 8-inch blade and 800 with a 10.

Check your state's rules too. Some limit hole size for certain kinds of fishing.

The math behind holes per charge

Inches per charge ÷ ice thickness = holes per charge. An auger rated for 1,300 inches in 20 inches of ice gives 65 holes, on paper. Multiply by the cold factor, 0.8 to start, and you plan for 52. Drilling a hole twice to clear slush, or re-opening yesterday's holes, eats charge too.

Batteries in the cold

Lithium batteries give less when they're cold. Keep the spare in an inside pocket or an insulated bag, not on the sled. Pull the battery off the auger between moves if the maker allows it, and keep it off bare ice.

Charge at room temperature, never on a frozen battery straight out of the truck. Write down how many holes you actually got on a cold day and set the cold factor from that.

Blades and the ice itself

Dull blades drain a battery faster than cold does, so keep the blade guard on whenever it's not in the ice. If the auger binds, stop and back it out.

A hole tells you how thick the ice is in that one spot. Compare it with the ice thickness chart, keep checking as you move, and ask locally about current and springs. If the auger breaks through fast, stop and go back the way you came.

Planning a full day with a shelter? The shelter sizer and the sled planner take care of the rest of the load.

Questions people ask

How many holes will I get on one battery?

Rated inches per charge divided by ice thickness, then trimmed for cold. An 8-inch Eskimo E40 rated for 1,300 inches gives 65 holes in 20 inches of ice on paper, about 52 at a 0.8 cold factor.

Should I get an 8 or 10 inch auger?

Eight inches covers panfish, walleye and most pike, and gets more holes per charge. Go 10 inches if you target big pike or lake trout and don't mind carrying more battery.

Why does cold weather cut the number of holes?

Lithium batteries deliver less energy when they're cold. Keep spares warm in a pocket or insulated bag and set the cold factor from your own count.

Can I use a cordless drill as an ice auger?

Yes, with an ice bit and adapter made for it. Use the drill and bit maker's recommended blade size, and enter the battery's real hole count once you know it.

Is a hand auger still worth it?

On early ice and for a few holes a day, yes. It's light, silent and never runs out of charge. In thick midwinter ice most anglers want power.

How should I store an auger battery in winter?

Warm and dry. Inside pocket or insulated bag on the ice, room temperature for charging, and follow the maker's storage notes for the off-season.

Does the calculator tell me if the ice is thick enough?

No. It only counts holes. Use the ice thickness chart and local reports, and keep checking as you go.

More free tools